| • लेसर आवृत्ति | |
| laser: लेजर लेज़र लेज़र | |
| frequency: प्रायिकता | |
laser frequency मीनिंग इन हिंदी
laser frequency उदाहरण वाक्य
उदाहरण वाक्य
अधिक: आगे- If the laser frequency drops, it will move further away from resonance and the error signal will decrease.
- Due to photodiode noise, the laser frequency can be swept across the transition and the photodiode reading averaged over many sweeps.
- Starting with a laser frequency well below the resonant frequency, photons from any one laser pass right through the majority of atoms.
- This means that if the laser frequency increases ( e . g . due to thermal drift ) it will come closer to resonance with the cavity.
- We need to measure the phase of the reflected beam, as this will tell us whether our laser frequency is higher or lower than the the cavities.
- Using megawatt powered free electron or solid state lasers in combination with adaptive mirrors approximately wide and a photovoltaic array on the climber tuned to the laser frequency for efficiency.
- Furthermore, nonlinearity of the oscillating cloud would produce both spatial and temporal harmonics, so nuclear transitions of higher multipolarity could also be driven at multiples of the laser frequency.
- Thus, as the laser frequency is swept across the resonance, a small dip in the absorption feature will be observed at each atomic transition ( generally hyperfine resonances ).
- An ideal locking signal would be 1 when the laser frequency is too low ( and thus would drive the frequency higher until it reached resonance ) and-1 when laser frequency is too high.
- An ideal locking signal would be 1 when the laser frequency is too low ( and thus would drive the frequency higher until it reached resonance ) and-1 when laser frequency is too high.
